Skip to main content Skip to search Skip to main navigation

IKA S 18 N - 19 G Dispersing tool, coarse, PTFE bearings, 10 to 1,500 ml, L004640

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 18 N - 19 G Dispersing tool, coarse, PTFE bearings, 10 to 1,500 ml, L004640"

The IKA S 18 N - 19 G (L004640) is a tool for coarse dispersion tasks on the IKA T 18 series drives, such as the T 18 digital ULTRA-TURRAX. The stainless steel tool covers a working range of 0.01 to 1.5 litres (10 to 1,500 millilitres, based on water) and is suitable for sample preparation when grinding and mixing are required.

Toothed geometry for pre-grinding

The letter G in the model designation stands for ‘coarse’. Unlike fine-grinding tools, the stator of this model features a coarsely serrated geometry with a gap width of 0.25 millimetres between the rotor and stator. This makes the S 18 N - 19 G suitable for the pre-grinding of solid sample components, the mixing of pigments or fillers into coarse suspensions, and for viscous media that could clog finer tools.

PTFE bearings for contact with aggressive media

The rotor shaft is mounted in a PTFE bearing, as indicated by the letter ‘N’ in the model designation. PTFE is chemically almost inert, meaning the tool can, according to IKA, also be used with aggressive solvents, acids and alkalis. One important application note remains: PTFE bearings rely on the medium for lubrication and cooling; the tool must therefore not run dry, otherwise the resulting frictional heat will destroy the bearing.

Hygiene and material quality

The tool is made of AISI 316L stainless steel and is corrosion-resistant, durable and can be easily dismantled and sterilised for applications in the medical or microbiological fields, whether by chemical disinfection, dry heat or in an autoclave. This reduces the risk of cross-contamination between different sample batches.

Typical applications

According to the manufacturer, the S 18 N - 19 G is designed as a dispersing tool for T-18 drives and for volumes ranging from 10 to 1,500 millilitres. In practice, it is suitable for:

  • Preliminary grinding of solid components in liquid samples
  • Coarse suspensions containing pigments or fillers
  • Viscous media that would be too viscous for finer tools
  • Sample preparation with high requirements for chemical resistance

Selection guide within the tool range

In addition to the coarse version described here, there are further tools for the T-18 drives with different gap geometries or made from different materials. The S 18 N - 10 G, with a narrower gap width, is suitable for finer end products; for single-use procedures and applications where no cleaning is required between samples, the plastic tools S 18 D - 10 G - KS and S 18 D - 14 G - KS are available.

Technical details

Compatible drivesT 18 digital ULTRA-TURRAX and other T-18 drives (see Compatible drives)
Processable volume (H₂O)0.01 to 1.5 l
Stator diameter19 mm
Rotor diameter12.7 mm
Gap width between stator and rotor0.25 mm
Maximum permissible speed25,000 rpm
Maximum circumferential speed16.6 m/s
Immersion depth35 to 170 mm
Installation length204 mm
Material in contact with the productPTFE, AISI 316L stainless steel
pH range2 to 13
Suitable for solventsYes
Suitable for abrasive substancesYes
Max. operating temperature180 °C
SterilisabilityAll methods
Final particle size of suspensions10 to 50 µm
Final particle size (emulsions)1 to 10 µm
Weight0.379 kg

Scope of delivery

  • 1 x IKA S 18 N - 19 G dispersing tool

A drive unit is not included; the tool is operated on a compatible T-18 drive.

Compatible drives

The S 18 N - 19 G is designed for use with several drives in the T-18 range: the T 18 digital ULTRA-TURRAX, as well as the T 18 digital Solution and T 18 mini digital Solution complete sets, which already include this tool. According to the manufacturer’s compatibility information, it is also compatible with the brushless drives T 18 brushless digital ULTRA-TURRAX, T 18 brushless digital Solution and the compact T 18 mini digital ULTRA-TURRAX.

Use, maintenance and disposal

Before first use, the tool should be securely screwed onto the drive unit and checked to ensure it is firmly in place. During operation, the tool must remain fully submerged in the medium at all times; the immersion depth ranges from 35 to 170 millimetres, depending on the container. After use, the tool can be detached from the drive unit for cleaning and, depending on requirements, chemically disinfected, treated with dry heat or autoclaved. As an accessory to an electrical appliance, the end-of-life tool must not be disposed of with household waste, but must be disposed of properly together with the associated drive unit.

Individual requirements & procurement service

Do you require a tool for finer emulsions, a spare part or assistance in selecting the appropriate gap geometry for your sample? Through our procurement service, we can assist you with procurement and compatibility enquiries.

Frequently Asked Questions

Which drives is the S 18 N - 19 G suitable for?
It is suitable for the T-18 drive family, including the T 18 digital ULTRA-TURRAX and the T-18 brushless drives.

What do the letters G and N in the name mean?
G stands for the coarse-toothed stator geometry, and N for the PTFE bearing on the rotor shaft.

Can I use the tool with solvents?
Yes, the PTFE bearing is virtually chemically inert and suitable for aggressive solvents, acids and alkalis, provided the tool does not run dry.

Is the tool autoclavable?
Yes, according to the manufacturer, it can be sterilised using all standard methods, including autoclaving.

Skip product gallery

Fits

Discount
Topseller
In stock
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
Manufacturer number: 0003720000
Sale price: €1,305.53
RRP €1,830.00 28% below manufacturer's RRP