Skip to main content Skip to search Skip to main navigation

IKA S 50 KD - G45F dispersing tool, Ø 45 mm, ball bearing, for T 50, 0010000631

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 KD - G45F dispersing tool, Ø 45 mm, ball bearing, for T 50, 0010000631"

The S 50 KD - G45F (0010000631) is designed for batch sizes ranging from 0.25 to 10 l. The stator measures 45 mm, the rotor 40 mm; at 10,000 rpm, speeds of up to 20.9 m/s are achieved at the rotor circumference. IKA specifies the T 50 digital as the drive.

Ball bearing with PTFE seal

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. Materials in contact with the product are FFPM, PTFE and AISI 316L. The pH range is 2 to 13; solvents are permitted. Under vacuum, the tool may be used down to 100 mbar; the maximum operating temperature is 150 °C. IKA states that it is autoclavable; the ball bearing is excluded from sterilisation.

Gap, fineness and dimensions

The gap between the rotor and stator is 0.5 mm wide. The final fineness ranges from 10 to 30 µm for suspensions and from 1 to 10 µm for emulsions. The immersion depth is 70 to 260 mm with an installation length of 300 mm; batch sizes of 250 to 10,000 ml are recommended. The tool weighs 0.658 kg.

Typical applications

  • Dispersing and emulsifying in batches of 0.25 to 10 l
  • Suspensions with a final fineness of 10 to 30 µm
  • Emulsions with a final fineness of 1 to 10 µm
  • Operations under vacuum down to 100 mbar
  • Batches containing solvents
  • Samples where the tool is autoclaved

Technical details

Processable volume (H2O)0.25 to 10 l
Stator diameter45 mm
Rotor diameter40 mm
Stator/rotor gap width0.5 mm
Max. permissible speed10,000 rpm
Max. peripheral speed20.9 m/s
Immersion depth70 to 260 mm
Installation length300 mm
Bearing and sealBall bearing, PTFE seal, FFKM O-ring
Materials in contact with the productFFPM, PTFE, AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C
SterilisabilityAutoclavable
Vacuum100 mbar
Final fineness, suspensions10 to 30 µm
Final fineness, emulsions1 to 10 µm
Weight0.658 kg

Scope of delivery

  • 1 x IKA S 50 KD - G45F dispersing tool (single tool)
  • The T 50 digital drive is not included in the scope of delivery.

Same dimensions, different bearing arrangement

The S 50 N - G 45 F has the same stator, rotor and gap dimensions (45, 40 and 0.5 mm). It is made of PTFE and AISI 316L, has a specified operating temperature of 180 °C and an installation length of 290 mm with an immersion depth of 70 to 250 mm. The S 50 KG - HH - G 45 F also has a 45 mm stator and a 40 mm rotor, plus a mechanical seal and a vacuum rating of up to 1 mbar. The S 50 KD - G45M (0.5 to 15 l) has a narrower gap of 0.25 mm and a 40.5 mm rotor.

Individual requirements & procurement service

Whether you need a second tool to swap in, the T 50 digital drive or guidance on selecting the right geometry: we can source the equipment and provide advice through our procurement service.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP