IKA S 50 KG - HH - G 45 F Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008004100
€4,533.00
% Manufacturer's RRP: €6,044.00 25% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 50 KG - HH - G 45 F Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008004100"
The S 50 KG - HH - G 45 F (0008004100) handles 0.25 to 10 l with a 45 mm stator and a 40 mm rotor. The shaft is mounted on ball bearings; the single-acting mechanical seal consists of carbide against carbide. The T 50 digital serves as the drive.
Vacuum, pressure and media
With the mechanical seal, the unit is designed for vacuum down to 1 mbar and pressure up to 6 bar. Materials in contact with the product are FFPM, tungsten carbide (WC) and AISI 316L. IKA describes it as solvent-resistant. The maximum operating temperature is 150 °C; sterilisation is carried out using wet chemical methods.
Dimensions and final fineness
The immersion depth ranges from 70 to 250 mm, whilst the installation length is 290 mm. At a maximum peripheral speed of 20.9 m/s, the tool achieves final finenesses of 10 to 30 µm for suspensions and 1 to 10 µm for emulsions. It weighs 0.51 kg. At 40 mm, the rotor is larger than that of the S 50 KG - HH - G 45 G (36 mm), and the peripheral speed is correspondingly higher than its 18.8 m/s.
The same dimensions without a mechanical seal
With the same operating range and final particle size, but with PTFE bearings instead of a mechanical seal, the S 50 N - G 45 F is available. The immersion depth (70 to 250 mm) and installation length (290 mm) are the same as for this tool. Those working under vacuum should stick with the KG version.
Larger batches
The S 50 KG - HH - G 45 G, with a 36 mm rotor and a final fineness of 40 to 100 µm (suspensions), processes volumes of up to 20 l. The S 50 KG - HH - G 45 M covers volumes from 0.5 to 15 l and specifies 25 to 50 µm for suspensions and 5 to 20 µm for emulsions.
Typical applications
- Dispersing and emulsifying in batches of 0.25 to 10 l
- Operations under vacuum down to 1 mbar
- Processes at pressures up to 6 bar
- Batches containing solvents
- Samples where the tool is sterilised using wet chemical methods
Technical details
| Working range (H2O) | 0.25 to 10 l |
|---|---|
| Stator diameter | 45 mm |
| Rotor diameter | 40 mm |
| Maximum circumferential speed | 20.9 m/s |
| Immersion depth | 70 to 250 mm |
| Installation length | 290 mm |
| Bearing and seal | Ball bearing, single-acting mechanical seal (carbide/carbide) |
| Materials in contact with the product | FFPM, WC / AISI 316L |
| Suitable for solvents | Yes |
| Max. operating temperature | 150 °C |
| Sterilisability | wet chemical |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Final fineness of suspensions | 10 to 30 µm |
| Final fineness of emulsions | 1 to 10 µm |
| Weight | 0.51 kg |
Scope of delivery
- 1 x IKA S 50 KG - HH - G 45 F dispersing tool (single tool)
- The T 50 digital drive is not included in the scope of delivery.
Individual requirements and procurement service
We can supply the T 50 digital drive and a second tool for changing on request. The procurement service will assist with selecting the correct geometry.