Skip to main content Skip to search Skip to main navigation

IKA S 50 N - W 65 SK Cutting Head Dispersing Tool, Ø 65 mm, for T 50, 0008005100

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 N - W 65 SK Cutting Head Dispersing Tool, Ø 65 mm, for T 50, 0008005100"

A four-bladed cutting blade acting as the rotor, a stator diameter of 65 millimetres, weighing 1.5 kilograms: the IKA S 50 N - W 65 SK is a cutting head for the T 50 digital and operates in batches of 1 to 10 l.

What materials it cuts

IKA describes the tool as suitable for comminuting fibrous, elastic-soft, soft-tough and moist-plastic materials. The final particle size ranges from 50 to 200 micrometres for suspensions and from 5 to 15 micrometres for emulsions.

Design and resistance

The shaft runs in a PTFE slotted ring bearing. Materials in contact with the product are PTFE, AISI 316L and AISI 301. The tool is FDA-compliant according to the manufacturer, suitable for solvents and can be used in the pH range 2 to 13. Operating temperatures of up to 180 °C are permissible for short periods; sterilisation may be carried out using any method.

Rotational and immersion data

Speeds of up to 10,000 rpm are permitted, resulting in a circumferential speed of 28.8 metres per second at the rotor circumference. The immersion depth is 80 to 250 millimetres. The tool is intended for the T 50 digital drive.

Typical applications

  • Comminution of fibrous materials
  • Comminution of elastic-soft and soft-tough materials
  • Comminution of moist-plastic materials
  • Batches of 1 to 10 l
  • Processes involving solvents in the pH range 2 to 13

Technical details

Stator diameter65 mm
Rotor diameter55 mm
Rotor shapefour-bladed cutting blade
Processing volume (H2O)1 to 10 l
Max. permissible rotational speed10,000 rpm
Maximum circumferential speed28.8 m/s
Immersion depth80 to 250 mm
BearingPTFE slotted ring bearing
Material in contact with the productPTFE, AISI 316L, AISI 301
pH range2 to 13
Suitable for solventsYes
Max. operating temperature (short-term)180 °C
Sterilisabilityall methods
Final particle size of suspensions50 to 200 µm
Final particle size of emulsions5 to 15 µm
FDA compliance (according to the manufacturer)Yes
Weight1.5457 kg

Scope of delivery

  • 1 x IKA S 50 N - W 65 SK cutting head dispersing tool (single tool)
  • The drive is not included in the scope of delivery.

Other tools for the T 50 digital

For emulsifying and dispersing rather than cutting, there are, among others, the S 50 N - G 45 F with a 45-millimetre stator diameter and the S 50 KD - G 45 G ST with a 38-millimetre rotor diameter for 0.5 to 20 l. The S 50 KG - HH - G 45 G also covers volumes up to 20 l.

Selection guide: a comparison

ToolStator / RotorWorking range (H2O)
S 50 N - W 65 SK cutting head (this product)65 / 55 mm1 to 10 l
S 50 N - G 45 F45 / 40 mm0.25 to 10 l
S 50 KD - G45G ST45 / 38 mm0.5 to 20 l
S 50 KG - HH - G 45 G45 / 36 mm0.5 to 20 l

Individual requirements and procurement service

We can source the T 50 digital and other tools on request. The procurement service can assist with selection.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP