Skip to main content Skip to search Skip to main navigation

IKA S 65 C - G 65 M Dispersing Tool, Ø 65 mm, for T 65, 0010001666

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 65 C - G 65 M Dispersing Tool, Ø 65 mm, for T 65, 0010001666"

With an installation length of 520 millimetres and a weight of 3.91 kilograms, the IKA S 65 C - G 65 M is a tool for large batches of 2 to 40 l. The stator has a diameter of 65 millimetres and the rotor 58 millimetres.

Speed, gap and immersion depth

The gap between the rotor and stator is 0.5 millimetres wide. The maximum permissible speed is 9,500 rpm, resulting in a circumferential speed of 28.8 metres per second. The tool has an immersion depth of 90 to 450 millimetres; IKA recommends 94 to 450 millimetres. IKA specifies a final particle size of 20 to 50 micrometres for suspensions and 5 to 15 micrometres for emulsions.

Bearings and materials

The bearing system consists of ball bearings and ceramic plain bearings. The materials in contact with the product are AISI 316L and ceramic. The tool is suitable for solvents and can be used in the pH range of 2 to 13. The maximum operating temperature is 170 °C. It is not designed for vacuum operation.

Drive

The tool is intended for use with the T 65 basic and T 65 digital dispersers. It may be sterilised using any method (except for the ball bearings).

Typical applications

  • Dispersing and emulsifying in batches of 2 to 40 l
  • Emulsions with a final particle size of 5 to 15 µm
  • Suspensions with a final particle size of 20 to 50 µm
  • Immersion depths of 90 to 450 mm
  • Media containing solvents at operating temperatures up to 170 °C

Technical details

Stator diameter65 mm
Rotor diameter58 mm
Stator/rotor gap width0.5 mm
Processable volume (H2O)2 to 40 l
Maximum permissible speed9,500 rpm
Maximum circumferential speed28.8 m/s
Immersion depth90 to 450 mm
Recommended immersion depth94 to 450 mm
Installation length520 mm
Bearing typeBall bearings and ceramic plain bearings
Material in contact with the productAISI 316L, ceramic
pH range2 to 13
Suitable for solventsYes
Suitable for vacuumNo
Sterilisabilityall methods (except ball bearings)
Max. operating temperature170 °C
Final particle size of suspensions20 to 50 µm
Final particle size of emulsions5 to 15 µm
Weight3.91 kg

Scope of delivery

  • 1 x IKA S 65 C - G 65 M dispersing tool (single tool)
  • The drive is not included in the scope of delivery.

Additional tools for the T 65

With a rotor diameter of 53 millimetres and a working range of 2 to 50 l, there is the S 65 C - G 65 G. The S 65 KG - HH - G 65 G covers the same volume range.

Selection guide: a comparison

ToolStator / RotorWorking range (H2O)
S 65 C - G 65 M (this product)65 / 58 mm2 to 40 l
S 65 C - G 65 G65 / 53 mm2 to 50 l
S 65 KG - HH - G 65 G65 / 53 mm2 to 50 l

Individual requirements and procurement service

We can source the T 65 digital and other tools on request. The procurement service can assist with selection.

Skip product gallery

Fits

Discount Promo In stock
IKA T 65 digital ULTRA-TURRAX Dispergierer, 2 bis 50 l, bis 9.500 rpm, 0004234500, Produktansicht
IKA T 65 digital ULTRA-TURRAX disperser, 2 to 50 l, up to 9,500 rpm, 0004234500
Manufacturer number: 0004234500
Sale price: €7,977.60
RRP €9,972.00 20% below manufacturer's RRP