IKA S 65 KG - HH - G 65 G Dispersing Tool, Ø 65 mm, Suitable for Vacuum Use, 0010010765
€4,394.40
% Manufacturer's RRP: €5,493.00 20% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 65 KG - HH - G 65 G Dispersing Tool, Ø 65 mm, Suitable for Vacuum Use, 0010010765"
A vacuum down to 1 mbar and a pressure up to 6 bar are among the features that distinguish the S 65 KG - HH - G 65 G (0010010765) from the ceramic tool S 65 C - G 65 G. Both have a 65 mm stator and process 2 to 50 l on the T 65. Here, a single-acting mechanical seal made of carbide against carbide is fitted to the ball-bearing-mounted shaft.
Construction and materials
Materials in contact with the product include FFPM, tungsten carbide (WC) and AISI 316L. The tool is solvent-resistant and FDA-compliant according to the manufacturer; the pH range is 2 to 13. Operating temperatures of up to 170 °C are permissible for short periods, and it can be sterilised using all methods.
Dimensions
The rotor draws in the medium and forces it radially through the stator slots. The rotor has a diameter of 53 mm with a gap width of 0.5 mm; the maximum permissible speed is 9,500 rpm, resulting in a circumferential speed of 26.4 m/s. The installation length is 520 mm, the dimensions are 65 x 560 x 65 mm, and the weight is 4.03 kg. The final particle size is between 25 and 75 µm for suspensions and between 5 and 25 µm for emulsions.
Suitable drives and variants
The tool runs on the T 65 digital. Another geometry is the S 65 C - G 65 M, made from AISI 316L and ceramic, which processes volumes of 2 to 40 l.
Typical applications
- Dispersing and emulsifying volumes from 2 to 50 l
- Operating under vacuum down to 1 mbar
- Processes at pressures up to 6 bar
- Applications where FDA compliance of the tool is required
Technical details
| Working range (H2O) | 2 to 50 l |
|---|---|
| Stator diameter | 65 mm |
| Rotor diameter | 53 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. permissible speed | 9,500 rpm |
| Maximum circumferential speed | 26.4 m/s |
| Immersion depth | 90 to 450 mm |
| Installation length | 520 mm |
| Bearing and seal | Ball bearing, single-acting mechanical seal (carbide/carbide) |
| Materials in contact with the product | FFPM, WC / AISI 316L |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 170 °C |
| Sterilisability | All methods |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Final particle size of suspensions | 25 to 75 µm |
| Final particle size of emulsions | 5 to 25 µm |
| FDA compliance (according to the manufacturer) | Yes |
| Dimensions (W x H x D) | 65 x 560 x 65 mm |
| Weight | 4.03 kg |
Scope of delivery
- 1 x IKA S 65 KG - HH - G 65 G dispersing tool (single tool)
The T 65 digital drive is not included in the Scope of delivery.
Individual requirements and procurement service
Do you also need the drive unit, a replacement tool or help choosing between the different models? We source the components via our procurement service and tailor them to your specific requirements.