Skip to main content Skip to search Skip to main navigation

IKA S 50 KG - HH - G 45 G - ST Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0010000648

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 KG - HH - G 45 G - ST Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0010000648"

The ‘ST’ suffix in the name distinguishes the S 50 KG - HH - G 45 G - ST (0010000648) from the version without ‘ST’, the S 50 KG - HH - G 45 G, which has the same stator and rotor dimensions (45 and 36 mm). The unit processes volumes of 0.5 to 20 l and is driven by the T 50 digital drive.

Mechanical seal for vacuum

The shaft is mounted on ball bearings; the single-acting mechanical seal consists of tungsten carbide against tungsten carbide. Operation under vacuum down to 1 mbar is possible; the pressure may reach up to 6 bar. Materials in contact with the product are FFPM, tungsten carbide (WC) and AISI 316L. The tool is solvent-resistant, with a pH range of 2 to 13. Sterilisation is carried out using wet chemical methods, and the short-term operating temperature is up to 150 °C.

Rotor, fineness and dimensions

The rotor measures 36 mm and, at the permissible speed, reaches up to 18.8 m/s at the circumference. The final fineness ranges from 40 to 100 µm for suspensions and from 10 to 30 µm for emulsions. The immersion depth is 70 to 260 mm, and the installation length is 300 mm. The tool weighs 0.576 kg.

Typical applications

  • Dispersing and emulsifying volumes of 0.5 to 20 l
  • Operations under vacuum down to 1 mbar
  • Processes with overpressure up to 6 bar
  • Suspensions with final particle sizes of 40 to 100 µm
  • Solvent-based processes

Technical details

Processable volume (H2O)0.5 to 20 l
Stator diameter45 mm
Rotor diameter36 mm
Max. circumferential speed18.8 m/s
Immersion depth70 to 260 mm
Installation length300 mm
Bearing and sealBall bearing, single-acting mechanical seal (carbide/carbide)
Materials in contact with the productFFPM, WC / AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature150 °C (for short periods)
Sterilisabilitywet chemical
Vacuum1 mbar
Max. pressure6 bar
Final fineness of suspensions40 to 100 µm
Final fineness of emulsions10 to 30 µm
Weight0.576 kg

Scope of delivery

  • 1 x IKA S 50 KG - HH - G 45 G - ST dispersing tool (single tool)
  • The T 50 digital drive is not included in the scope of delivery.

Rotor sizes in the S 50 series

The S 50 KD - G 45 G ST is also an ST version for 0.5 to 20 l, but has a 38 mm rotor, 19.9 m/s and operates under vacuum down to 100 mbar. The S 50 KD - G 45 G also has the same stator, the same rotor and the same operating range as described here, and is also suitable for suspensions with particle sizes of 40 to 100 µm. The S 50 KG - HH - G 45 M also features a mechanical seal and operates under vacuum down to 1 mbar, but has a 40.5 mm rotor, a capacity of 0.5 to 15 l and a particle size range of 25 to 50 µm for suspensions.

Individual requirements and procurement service

Whether you need a second tool for swapping, a T 50 digital drive or assistance with geometry: we can sort this out via our procurement service.

Skip product gallery

Fits

Discount In stock
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000
Sale price: €3,181.50
RRP €4,242.00 25% below manufacturer's RRP