IKA S 65 C - G 65 F Dispersing Tool, Ø 65 mm, Ceramic, for T 65, 0010001667
€4,313.60
% Manufacturer's RRP: €5,392.00 20% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 65 C - G 65 F Dispersing Tool, Ø 65 mm, Ceramic, for T 65, 0010001667"
In the S 65 C - G 65 F (0010001667), the parts in contact with the product are made of AISI 316L and ceramic. The tool is designed for batch sizes of 2 to 30 l and is operated by the T 65 digital drive.
Bearings and limit values
The shaft runs in a ball bearing and a ceramic plain bearing. This tool is not designed for use under vacuum. Solvents are permitted; the pH range is from 2 to 13. The maximum operating temperature is 170 °C; sterilisation may be carried out using any method.
Geometry and fineness
Stator 65 mm, rotor 58 mm, gap 0.5 mm. At 9,500 rpm, the circumferential speed at the rotor reaches 28.8 m/s. The final fineness ranges from 5 to 20 µm for suspensions and 1 to 10 µm for emulsions. The immersion depth is 90 to 450 mm with an installation length of 520 mm. The tool weighs 3.94 kg. The 58 mm rotor achieves a higher circumferential speed than the 53 mm rotor of the S 65 C - G 65 G, at 26.4 m/s.
Typical applications
- Dispersing and emulsifying 2 to 30 l
- Suspensions with final particle sizes of 5 to 20 µm
- Emulsions with final particle sizes of 1 to 10 µm
- Batches with solvents in the pH range 2 to 13
- Processes up to 170 °C without vacuum operation
Technical details
| Processable volume (H2O) | 2 to 30 l |
|---|---|
| Stator diameter | 65 mm |
| Rotor diameter | 58 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. permissible speed | 9,500 rpm |
| Maximum circumferential speed | 28.8 m/s |
| Immersion depth | 90 to 450 mm |
| Installation length | 520 mm |
| Bearing | Ball bearings and ceramic plain bearings |
| Materials in contact with the product | AISI 316L, ceramic |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 170 °C |
| Sterilisability | All methods |
| Suitable for vacuum | No |
| Final particle size of suspensions | 5 to 20 µm |
| Final particle size of emulsions | 1 to 10 µm |
| Weight | 3.94 kg |
Scope of delivery
- 1 x IKA S 65 C - G 65 F dispersing tool (single tool)
- The T 65 digital drive is not included in the Scope of delivery.
Comparison within the S 65 series
The S 65 KD - G 65 F has the same geometry with a PTFE seal and FFKM O-ring: same stator, same rotor, same gap, 2 to 30 l and the same final particle sizes, plus vacuum down to 100 mbar. For applications up to 50 l, the S 65 C - G 65 G also features ceramic components, but with a 53 mm rotor and a particle size range of 25 to 75 µm for suspensions. Fitted with a mechanical seal, capable of a vacuum down to 1 mbar and pressure up to 6 bar, but also featuring a 65 mm stator and a 58 mm rotor, the S 65 KG - HH - G 65 F operates at 2 to 30 l.
Individual requirements and procurement service
We can source the T 65 digital drive and other equipment on request. The procurement service will put together the right combination for your batch size.