Skip to main content Skip to search Skip to main navigation

IKA S 65 KD - G 65 F Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000643

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 65 KD - G 65 F Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000643"

With an installation length of 520 mm and a weight of 4.24 kg, the S 65 KD - G 65 F (0010000643) is one of the larger tools for the T 65 digital. It processes 2 to 30 l with a 65 mm stator and a 58 mm rotor. The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring.

Bearings, materials and limits

Materials in contact with the product are FFPM, PTFE and AISI 316L. The pH range is from 2 to 13. Under vacuum, the tool may be used down to 100 mbar; the maximum operating temperature is 170 °C. Sterilisation is carried out using a wet chemical method.

Geometry and fineness

The gap between the rotor and stator is 0.5 mm wide. At the maximum permissible speed of 9,500 rpm, the circumferential speed of the rotor reaches 28.8 m/s. The final particle size is 5 to 20 µm for suspensions and 1 to 10 µm for emulsions. The immersion depth is 80 to 450 mm; batch sizes of 2,000 to 30,000 ml are recommended.

Mechanical seal as an alternative

The S 65 KG - HH - G 65 F has the same operating range and the same rotor, but features a carbide mechanical seal. It operates under vacuum down to 1 mbar and at pressures up to 6 bar and has an installation length of 510 mm.

Larger capacities

For volumes up to 50 l, the S 65 C - G 65 G with AISI 316L and ceramic components and the S 65 KG - HH - G 65 G with a mechanical seal are suitable. Both have a 53 mm rotor and specify 25 to 75 µm for suspensions.

Typical applications

  • Dispersing and emulsifying in batches of 2 to 30 l
  • Operation under vacuum down to 100 mbar
  • Suspensions with final particle sizes of 5 to 20 µm
  • Emulsions with final particle sizes of 1 to 10 µm
  • Processes with operating temperatures up to 170 °C

Technical details

Working range (H2O)2 to 30 l
Recommended working range2,000 to 30,000 ml
Stator diameter65 mm
Rotor diameter58 mm
Stator/rotor gap width0.5 mm
Max. permissible speed9,500 rpm
Maximum circumferential speed28.8 m/s
Immersion depth80 to 450 mm
Installation length520 mm
Bearing and sealBall bearing with PTFE seal and FFKM O-ring
Materials in contact with the productFFPM, PTFE, AISI 316L
pH range2 to 13
Max. operating temperature170 °C
Sterilisabilitywet chemical
Vacuum100 mbar
Final particle size of suspensions5 to 20 µm
Final particle size of emulsions1 to 10 µm
Weight4.24 kg

Scope of delivery

  • 1 x IKA S 65 KD - G 65 F dispersing tool (single tool)
  • The T 65 digital drive is not included in the scope of delivery.

Individual requirements and procurement service

We can source the T 65 digital drive and other tools on request. The procurement service will put together the right combination for your application.

Skip product gallery

Fits

Discount Promo In stock
IKA T 65 digital ULTRA-TURRAX Dispergierer, 2 bis 50 l, bis 9.500 rpm, 0004234500, Produktansicht
IKA T 65 digital ULTRA-TURRAX disperser, 2 to 50 l, up to 9,500 rpm, 0004234500
Manufacturer number: 0004234500
Sale price: €7,977.60
RRP €9,972.00 20% below manufacturer's RRP