IKA S 65 KG - HH - G 65 F Dispersing Tool, Ø 65 mm, Suitable for Vacuum Use, 0010010768
€4,872.80
% Manufacturer's RRP: €6,091.00 20% below manufacturer's RRP
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA S 65 KG - HH - G 65 F Dispersing Tool, Ø 65 mm, Suitable for Vacuum Use, 0010010768"
The S 65 KG - HH - G 65 F (0010010768), with a 65 mm stator and a 58 mm rotor, processes batches ranging from 2 to 30 l. The shaft is mounted on ball bearings; the mechanical seal consists of carbide against carbide. IKA specifies the T 65 digital as the drive unit.
Vacuum and pressure
The unit is designed for vacuum down to 1 mbar and pressure up to 6 bar. Materials in contact with the product include FFPM, tungsten carbide (WC) and AISI 316L. It is suitable for solvents, with a pH range of 2 to 13. The maximum operating temperature is 170 °C, and it may be sterilised using any method. FDA compliance is stated.
Geometry and Final Particle Size
The gap between the rotor and stator is 0.5 mm wide, and the circumferential speed is a maximum of 28.8 m/s. The final fineness is 5 to 20 µm for suspensions and 1 to 10 µm for emulsions. The immersion depth ranges from 80 to 450 mm, and the installation length is 510 mm. The tool measures 65 x 550 x 65 mm and weighs 4.45 kg.
Other tools in the S 65 series
The S 65 KG - HH - G 65 M has the same design, processes 2 to 40 l and specifies 20 to 50 µm (suspensions) and 5 to 15 µm (emulsions). The S 65 KG - HH - G 65 G has a 53 mm rotor and processes 2 to 50 l. The S 65 KD - G 65 F is available with a PTFE seal and FFKM O-ring instead of a mechanical seal, and with a vacuum down to 100 mbar.
Typical applications
- Dispersing and emulsifying in batches of 2 to 30 l
- Operations under vacuum down to 1 mbar
- Processes at pressures up to 6 bar
- Batches involving solvents
- Applications where FDA compliance is required
Technical details
| Working range (H2O) | 2 to 30 l |
|---|---|
| Stator diameter | 65 mm |
| Rotor diameter | 58 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. circumferential speed | 28.8 m/s |
| Immersion depth | 80 to 450 mm |
| Installation length | 510 mm |
| Bearings and seals | Ball bearing, mechanical seal (carbide/carbide) |
| Materials in contact with the product | FFPM, WC / AISI 316L |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 170 °C |
| Sterilisability | All methods |
| Vacuum | 1 mbar |
| Max. pressure | 6 bar |
| Final fineness of suspensions | 5 to 20 µm |
| Final fineness of emulsions | 1 to 10 µm |
| FDA compliance (according to the manufacturer) | Yes |
| Dimensions (W x H x D) | 65 x 550 x 65 mm |
| Weight | 4.45 kg |
Scope of delivery
- 1 x IKA S 65 KG - HH - G 65 F dispersing tool (single tool)
- The T 65 digital drive is not included in the scope of delivery.
Individual requirements and procurement service
We can source the T 65 digital drive and other tools on request. The procurement service assists in selecting the appropriate geometry.