Skip to main content Skip to search Skip to main navigation

IKA S 65 KG - HH - G 65 M Dispersing Tool, Ø 65 mm, Suitable for Use with a Vacuum, 0010010767

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 65 KG - HH - G 65 M Dispersing Tool, Ø 65 mm, Suitable for Use with a Vacuum, 0010010767"

The S 65 KG - HH - G 65 M (0010010767) can process up to 40 l in a single batch; the minimum capacity is 2 l. The stator and rotor measure 65 and 58 mm respectively. The shaft is mounted on ball bearings, and the mechanical seal consists of carbide against carbide. IKA specifies the T 65 digital as the drive unit.

Position within the S 65 series

The S 65 KG - HH - G 65 F has the same rotor, but processes only 2 to 30 l and achieves 5 to 20 µm (suspensions) and 1 to 10 µm (emulsions). The S 65 KG - HH - G 65 G has a smaller rotor (53 mm), processes 2 to 50 l and specifies 25 to 75 µm for suspensions. The unit described here falls between these, with particle sizes of 20 to 50 µm and 5 to 15 µm.

Vacuum and pressure

The unit operates under vacuum down to 1 mbar and at pressures up to 6 bar. Materials in contact with the product include FFPM, tungsten carbide (WC) and AISI 316L. It is suitable for solvents; the pH range is from 2 to 13. The maximum operating temperature is 170 °C. Sterilisation is permitted using all methods; FDA compliance is specified.

Dimensions and speed

The gap between the rotor and stator is 0.5 mm wide. A speed of 9,500 rpm is permitted, with the rotor circumference reaching up to 28.8 m/s. The immersion depth is 80 to 450 mm, and the installation length is 510 mm. The tool measures 65 x 550 x 65 mm and weighs 4.41 kg.

Without vacuum

If a vacuum is not required, the S 65 C - G 65 M is available with the same 2 to 40 l capacity and 58 mm rotor. The parts in contact with the product are made of AISI 316L and ceramic, and it is not suitable for vacuum applications.

Typical applications

  • Dispersing and emulsifying in batches of 2 to 40 l
  • Operations under vacuum down to 1 mbar
  • Processes at pressures up to 6 bar
  • Batches containing solvents
  • Applications where FDA compliance is required

Technical details

Working range (H2O)2 to 40 l
Stator diameter65 mm
Rotor diameter58 mm
Stator/rotor gap width0.5 mm
Max. permissible speed9,500 rpm
Maximum circumferential speed28.8 m/s
Immersion depth80 to 450 mm
Installation length510 mm
Bearings and sealsBall bearing, mechanical seal (carbide/carbide)
Materials in contact with the productFFPM, WC / AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature170 °C
SterilisabilityAll methods
Vacuum1 mbar
Max. pressure6 bar
Final fineness of suspensions20 to 50 µm
Final fineness of emulsions5 to 15 µm
FDA compliance (according to the manufacturer)Yes
Dimensions (W x H x D)65 x 550 x 65 mm
Weight4.41 kg

Scope of delivery

  • 1 x IKA S 65 KG - HH - G 65 M dispersing tool (single tool)
  • The T 65 digital drive is not included in the scope of delivery.

Individual requirements and procurement service

We can source the T 65 digital drive and other tools on request. The procurement service provides assistance in selecting the correct geometry.

Skip product gallery

Fits

Discount Promo In stock
IKA T 65 digital ULTRA-TURRAX Dispergierer, 2 bis 50 l, bis 9.500 rpm, 0004234500, Produktansicht
IKA T 65 digital ULTRA-TURRAX disperser, 2 to 50 l, up to 9,500 rpm, 0004234500
Manufacturer number: 0004234500
Sale price: €7,977.60
RRP €9,972.00 20% below manufacturer's RRP