Skip to main content Skip to search Skip to main navigation

IKA S 65 KD - G 65 G Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000641

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 65 KD - G 65 G Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000641"

The S 65 KD - G 65 G (0010000641) is suitable for batches ranging from 2 to 50 l. The stator and rotor measure 65 and 53 mm respectively, with a gap of 0.5 mm. IKA specifies the T 65 digital as the drive.

Ball bearing with PTFE seal

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring; the materials in contact with the product are FFPM, PTFE and AISI 316L. The unit is suitable for solvents; the pH range is 2 to 13. A vacuum of up to 100 mbar is permitted, and the maximum operating temperature is 170 °C. Sterilisation is carried out using a wet chemical method.

Speed, fineness and dimensions

At 9,500 rpm, the rotor circumference reaches 26.4 m/s. The final fineness ranges from 25 to 75 µm for suspensions and from 5 to 25 µm for emulsions. The immersion depth is 90 to 450 mm, the installation length is 520 mm, and batch sizes of 2,000 to 50,000 ml are recommended. The tool weighs 4.39 kg.

Typical applications

  • Dispersing and emulsifying 2 to 50 l
  • Suspensions with final particle sizes of 25 to 75 µm
  • Emulsions with final particle sizes of 5 to 25 µm
  • Operations under vacuum down to 100 mbar
  • Processes involving solvents

Technical details

Processable volume (H2O)2 to 50 l
Stator diameter65 mm
Rotor diameter53 mm
Stator/rotor gap width0.5 mm
Max. permissible speed9,500 rpm
Maximum circumferential speed26.4 m/s
Immersion depth90 to 450 mm
Installation length520 mm
Bearing and sealBall bearing, PTFE seal, FFKM O-ring
Materials in contact with the productFFPM, PTFE, AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature170 °C
Sterilisabilitywet chemical
Vacuum100 mbar
Final particle size of suspensions25 to 75 µm
Final particle size of emulsions5 to 25 µm
Weight4.39 kg

Scope of delivery

  • 1 x IKA S 65 KD - G 65 G dispersing tool (single tool)
  • The T 65 digital drive is not included in the scope of delivery.

Variants with a 53 mm rotor

Two further tools have the same geometry (65 mm stator, 53 mm rotor, 0.5 mm gap): the S 65 C - G 65 G with AISI 316L and ceramic, which is not designed for vacuum use, and the S 65 KG - HH - G 65 G with a mechanical seal, capable of operating under vacuum down to 1 mbar and at pressures up to 6 bar. The S 65 KD - G 65 F operates with a 58 mm rotor and a particle size range of 5 to 20 µm for suspensions, but is limited to a capacity of 30 l. The larger rotor of the S 65 KD - G 65 M (58 mm, 28.8 m/s) handles 2 to 40 l and specifies 20 to 50 µm for suspensions.

Individual requirements and procurement service

A second tool, the T 65 digital drive or help with selection: we source them and advise you through our procurement service.

Skip product gallery

Fits

Discount Promo In stock
IKA T 65 digital ULTRA-TURRAX Dispergierer, 2 bis 50 l, bis 9.500 rpm, 0004234500, Produktansicht
IKA T 65 digital ULTRA-TURRAX disperser, 2 to 50 l, up to 9,500 rpm, 0004234500
Manufacturer number: 0004234500
Sale price: €7,977.60
RRP €9,972.00 20% below manufacturer's RRP