Skip to main content Skip to search Skip to main navigation

IKA S 65 KD - G 65 M Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000642

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 65 KD - G 65 M Dispersing Tool, Ø 65 mm, Ball Bearings, for T 65, 0010000642"

The S 65 KD - G 65 M (0010000642) can process up to 40 l of water on a T 65 digital. There is a gap of 0.5 mm between the 65 mm stator and the 58 mm rotor; at 9,500 rpm, the rotor circumference reaches 28.8 m/s.

Seals and materials

The shaft runs in a ball bearing with a PTFE seal and an FFKM O-ring. Materials in contact with the product are FFPM, PTFE and AISI 316L. Solvents are permitted; the pH range is from 2 to 13. Under vacuum, the tool may be used down to 100 mbar; the maximum operating temperature is 170 °C. Sterilisation is carried out using a wet chemical process.

Fineness and dimensions

The final fineness ranges from 20 to 50 µm for suspensions and 5 to 15 µm for emulsions. The immersion depth is 80 to 450 mm, and the installation length is 520 mm. Batches of 2,000 to 40,000 ml are recommended. The tool weighs 4.21 kg.

Typical applications

  • Dispersing and emulsifying 2 to 40 l
  • Emulsions with final particle sizes of 5 to 15 µm
  • Suspensions with final particle sizes of 20 to 50 µm
  • Operations under vacuum down to 100 mbar
  • Processes involving solvents

Technical details

Processable volume (H2O)2 to 40 l
Stator diameter65 mm
Rotor diameter58 mm
Stator/rotor gap width0.5 mm
Max. permissible speed9,500 rpm
Maximum circumferential speed28.8 m/s
Immersion depth80 to 450 mm
Installation length520 mm
Bearing and sealBall bearing, PTFE seal, FFKM O-ring
Materials in contact with the productFFPM, PTFE, AISI 316L
pH range2 to 13
Suitable for solventsYes
Max. operating temperature170 °C
Sterilisabilitywet chemical
Vacuum100 mbar
Final particle size of suspensions20 to 50 µm
Final particle size of emulsions5 to 15 µm
Weight4.21 kg

Scope of delivery

  • 1 x IKA S 65 KD - G 65 M dispersing tool (single tool)
  • The T 65 digital drive is not included in the scope of delivery.

Same geometry, different seal

The S 65 KG - HH - G 65 M has the same geometry (65 mm stator, 58 mm rotor, 0.5 mm gap) with a mechanical seal, which allows a vacuum down to 1 mbar and has an installation length of 510 mm. The S 65 C - G 65 M uses ceramic instead of PTFE and also operates with volumes of 2 to 40 l, but is not designed for vacuum. The S 65 KD - G 65 F is available for batches of up to 30 l with particle sizes of 5 to 20 µm in suspensions. The S 65 KD - G 65 G operates with a 53 mm rotor and handles batches of up to 50 l.

Individual requirements and procurement service

We can source the T 65 digital drive and other tools on request. Through our procurement service, we will work with you to determine which geometry is best suited to your batch.

Skip product gallery

Fits

Discount Promo In stock
IKA T 65 digital ULTRA-TURRAX Dispergierer, 2 bis 50 l, bis 9.500 rpm, 0004234500, Produktansicht
IKA T 65 digital ULTRA-TURRAX disperser, 2 to 50 l, up to 9,500 rpm, 0004234500
Manufacturer number: 0004234500
Sale price: €7,977.60
RRP €9,972.00 20% below manufacturer's RRP